Guide to Properly Sizing a Ring for the Perfect Fit

Guide to Properly Sizing a Ring for the Perfect Fit

Selecting the right ring size is a crucial step in ensuring that a piece of jewelry not only looks stunning but also fits comfortably on the wearer's finger. Whether you're planning a surprise proposal or treating yourself to a new ring, understanding how to measure your finger accurately is key. This guide will walk you through the steps to properly size a ring for a perfect fit.

Why Ring Size Matters:

Wearing a ring that fits well is not only aesthetically pleasing but also essential for comfort. A ring that is too tight can be uncomfortable, while one that is too loose may risk slipping off or spinning around the finger. Achieving the correct ring size ensures both the visual appeal and the wearer's ease.

How to Measure Ring Size at Home:

Several methods can be employed to measure ring size at home, offering convenience and accuracy. Here's a step-by-step guide:

Method 1: Paper Strip Measurement

  1. Materials Needed:

    • A strip of paper
    • Pen or marker
    • Ruler
  2. Procedure:
    • Cut a thin strip of paper, approximately 1/4 inch or 6 mm wide.
    • Wrap the paper around the base of the finger you want to measure.
    • Mark where the strip overlaps with a pen or marker.
    • Use a ruler to measure the length of the paper from the end to the marked point.
    • Match the measurement to a ring size chart Circumference column to determine the correct size.

Method 2: String or Dental Floss

  1. Materials Needed:

    • String or dental floss
    • Pen or marker
    • Ruler
  2. Procedure:
    • Wrap the string or dental floss around the base of the finger.
    • Mark where the string or floss overlaps.
    • Measure the length between the end and the marked point with a ruler.
    • Refer to a ring size chart in Circumference column to find the corresponding size.

Method 3: Existing Ring Measurement

  1. Materials Needed:

    • A well-fitting ring
    • Ruler
  2. Procedure:

    • Place the ring on a ruler and measure the inside diameter.
    • Match the diameter to the column Diameter in the size table below to a ring size chart for the correct size.

Considerations for Accurate Measurement:

  • Measure Multiple Times: To ensure accuracy, measure your finger at different times of the day when temperatures and humidity levels may vary, affecting finger size.
  • Room Temperature: Measure your finger at room temperature as cold or warm weather can cause fluctuations in finger size.

    Check for Comfort: A well-fitted ring should slide on smoothly but offer slight resistance when coming off. It should feel comfortable without being too tight or too loose.

Professional Ring Sizing:

For the utmost precision, consider professional ring sizing done by a jeweler. They possess the expertise and tools to measure your finger accurately, and you can often get sized at local jewelry stores or by using online ring sizing services provided by reputable jewelers.

You can come to our market stall as well and we can do complimentary professional sizing for you.

Conclusion:

Selecting the right ring size is a vital aspect of the jewelry-buying process. Whether you opt for DIY methods at home or seek professional sizing assistance, the goal is to achieve a comfortable and secure fit. By following these steps, you can be confident in choosing a ring size that ensures both elegance and comfort for the wearer.

International Ring Finger Sizes Diameter = Internal diameter in millimeters. Circumference = Internal circumference in millimeters.

Britain Europe Japan USA Diameter Circumference
      0 11.54 36.25
A       11.9 37.38
    0   12 37.7
A 1/2       12.1 38.01
B       12.3 38.64
      1 12.37 38.86
B 1/2       12.5 39.27
      1 1/4 12.58 39.52
C       12.7 39.9
  0.15   1 1/2 12.78 40.15
C 1/2 0.53     12.9 40.53
  0.84 1 1 3/4 13 40.84
  1     13.05 41
D 1.15     13.1 41.15
  1.5   2 13.21 41.5
D 1/2 1.78     13.3 41.78
  1.88 2   13.33 41.88
  2     13.37 42
  2.13   2 1/4 13.41 42.13
E 2.41     13.5 42.41
  2.76   2 1/2 13.61 42.76
  2.91 3   13.66 42.91
E 1/2 3     13.69 43
  3.42   2 3/4 13.82 43.42
F 3.67     13.9 43.67
  3.98 4   14 43.98
  4     14.01 44
  4.14   3 14.05 44.14
F 1/2 4.3     14.1 44.3
  4.74   3 1/4 14.24 44.74
G 4.92     14.3 44.92
  5     14.32 45
  5.02 5   14.33 45.02
  5.4   3 1/2 14.45 45.4
G1/2 5.55     14.5 45.55
  6     14.64 46
  6.02   3 3/4 14.65 46.02
  6.06 6   14.66 46.06
H 6.18     14.7 46.18
  6.68   4 14.86 46.68
H1/2 6.81     14.9 46.81
  7     14.96 47
  7.12 7   15 47.12
  7.34   4 1/4 15.07 47.34
I 7.44     15.1 47.44
  7.97   4 1/2 15.27 47.97
  8     15.28 48
I 1/2 8.07     15.3 48.07
  8.16 8   15.33 48.16
  8.63   4 3/4 15.48 48.63
J 8.69     15.5 48.69
  9     15.6 49
  9.2 9   15.66 49.2
J 1/2 9.32   5 15.7 49.32
K 9.95   5 1/4 15.9 49.95
  10     15.92 50
  10.27 10   16 50.27
K 1/2 10.58   5 1/2 16.1 50.58
  11     16.23 51
L 11.24   5 3/4 16.31 51.24
  11.3 11   16.33 51.3
L 1/2 11.87   6 16.51 51.87
  12     16.55 52
  12.34 12   16.66 52.34
M 12.46     16.7 52.46
  12.56   6 1/4 16.73 52.56
  13     16.87 53
M 1/2 13.09     16.9 53.09
  13.16   6 1/2 16.92 53.16
  13.41 13   17 53.41
N 13.72     17.1 53.72
  13.85   6 3/4 17.14 53.85
  14     17.19 54
N 1/2 14.35     17.3 54.35
  14.44 14   17.33 54.44
  14.51   7 17.35 54.51
O 14.98     17.5 54.98
  15   7 1/4 17.56 55
  15.48 15   17.66 55.48
O 1/2 15.61     17.7 55.61
  15.76   7 1/2 173/4 55.76
  16     17.83 56
P 16.23     17.9 56.23
  16.45   7 3/4 17.97 56.45
  16.55 16   18 56.55
P 1/2 16.86     18.1 56.86
  17     18.14 57
  17.15   8 18.19 57.15
Q 17.49     18.3 57.49
  17.59 17   18.33 57.59
  17.77   8 1/4 18.39 57.77
  18     18.46 58
Q 1/2 18.12     18.5 58.12
  18.4   8 1/2 18.59 58.4
  18.62 18   18.66 58.62
R 18.84     18.7 58.84
  19   8 3/4 18.78 59
R1/2 19.38     18.9 59.38
  19.66   9 18.99 59.66
  19.69 19   19 59.69
S 20     19.1 60
  20.38   9 1/4 19.22 60.38
S 1/2 20.63     19.3 60.63
  20.73 20   19.33 60.73
  20.98   9 1/2 19.41 60.98
  21     19.42 61
T 21.26     19.5 61.26
  21.67   9 3/4 19.63 61.67
  21.76 21   19.66 61.76
T 1/2 21.89     19.7 61.89
  22     19.74 62
  22.33   10 19.84 62.33
U 22.52     19.9 62.52
  22.83 22   20 62.83
  23   10 1/4 20.05 63
U 1/2 23.15     20.1 63.15
  23.59   10 1/2 20.24 63.59
W 1/2 25.66     20.9 65.66
  25.97 25   21 65.97
  26     21.01 66
  26.22   10 3/4 21.08 66.22
X 26.29     21.1 66.29
X 1/2 26.92   11 1/2 21.3 66.92
  27.01 26   21.33 67.01
Y 27.51   12 21.49 67.51
  28.02     21.65 68.02
  28.05 27   21.66 68.05
Y 1/2 28.2   12 1/4 21.71 68.2
Z 28.77   12 1/2 21.89 68.77
  28.99     21.96 68.99
  29.12 28   22 69.12
Z 1/2 29.43     22.1 69.43
  29.49   12 3/4 22.12 69.49
Z+1 29.99     22.28 69.99
  30.15 29 13 22.33 70.15
Z+1 1/2 30.69     22.5 70.69
  30.81   13 1/4 22.54 70.81
  31     22.6 71
  31.19 30   22.66 71.19
Z+2 31.31     22.7 71.31
  31.47   13 1/2 22.75 71.47
Z+2 1/2 32.01   13 3/4 22.92 72.01
  32.26 31   23 72.26
Z+3 32.57     23.1 72.57
  32.76   14 23.16 72.76
  33.01     23.24 73.01
Z+3 1/2 33.2     23.3 73.2
  33.32     23.34 73.32
  33.29 32   23.33 73.29
  33.42   14 1/4 23.37 73.42
Z+4 33.83     23.5 73.83
  33.98   14 1/2 23.55 73.98
  34.33 33   23.66 74.33
Z+4 1/2 34.46     23.7 74.46
  34.71   14 3/4 23.78 74.71
  34.99     23.87 74.99
Z+5 35.08     23.9 75.08
  35.4 34 15 24 75.4
Z+5 1/2 35.71     24.1 75.71
  36   15 1/4 24.19 76
Z+6 36.34     24.3 76.34
  36.43 35   24.33 76.43
  36.69   15 1/2 24.41 76.69
Z+6 1/2 37     24.51 77
  37.31   15 3/4 24.61 77.31
  37.47 36   24.66 77.47
Z+7 37.6     24.7 77.6
  38   16 24.83 78
Z+7 1/2 38.23     24.9 78.23
  38.54 37 16 1/4 25 78.54
Z+8       25.1 78.86
      16 1/2 25.24 79.29
Z+8 1/2       25.3 79.49
    38   25.34 79.61
      16 3/4 25.44 79.92
Z+9       25.5 80.12
    39 17 25.65 80.58
Z+9 1/2       25.7 50.48
      17 1/4 25.85 81.21
Z+10   40   25.9 51.11

 

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.